Home > Product Catalog > Wheel Lift Straps

Wheel Lift Straps

all·grip® wheel lift and dolly straps are designed to meet or exceed those supplied by the original equipment manufacturer. We offer the largest selection including those hard to find obsolete straps as well as the newest available on the market.

We also offer the proper ratchets and hooks which can be found in the Ratchets and Accessories section of our website.


Part # Working Load Limit Weight
WLS080 1,665 lbs. 1.00 lbs.
Lasso Strap 80"
The loose end of this wheel lift strap passes through the ring, like a lasso. Ratcheting then chokes the tire. Used on Century, Challenger, Nomar. 2" wide. 80" long. Ratchet sold separately. California Captivation by request.
Part # Working Load Limit Weight
WLS100 1,665 lbs. 1.00 lbs.
Lasso Strap 100"
The loose end of this wheel lift strap passes through the ring, like a lasso. Ratcheting then chokes the tire. Used on Century, Challenger, Nomar. 2" wide. 100" long. Ratchet sold separately. California Captivation by request.
Part # Working Load Limit Weight
WLS120 1,665 lbs. 1.00 lbs.
Lasso Strap 120"
The loose end of this wheel lift strap passes through the ring, like a lasso. Ratcheting then chokes the tire. Used on Century, Challenger, Nomar. 2" wide. 120” long. Ratchet sold separately. California Captivation by request.
Part # Working Load Limit Weight
WLS200 1,665 lbs. 1.00 lbs.
Chevron Type Strap
A special D ring attached to the wheel lift fork end provides the anchor point for this strap. Used on Chevron. 2" wide x 80" long. Ratchet sold separately.
Part # Working Load Limit Weight
WLS300 1,665 lbs. 1.10 lbs.
Weld-Built Type Strap
This tiedown has a snap hook with safety latch. The strap crosses diagonally to the tire and then is ratcheted. Used by Weld-Built. 2" wide x 100". Ratchet sold separately.
Part # Working Load Limit Weight
WLS400 1,665 lbs. 1.30 lbs.
Eagle Type Strap
This design uses a floating snap hook and round ring. Pressure is exerted over the tip of the tire using a special ratchet. Used by American Wheel Lift-Eagle. 2" wide x 84" long. Includes 24" long sliding sleeve. Ratchet sold separately.
Part # Working Load Limit Weight
WLS500 1,665 lbs. 3.80 lbs.
Wrap Around Strap
This strap encompasses the tire and both hooks anchor to a common point. Used on many after market units such as Avenger and Peterson Scoop. 2" wide x 100". Supplied with ratchet.
Part # Working Load Limit Weight
WLS600 1,665 lbs. 2.00 lbs.
Holmes Type Basket Strap
The combination of horizontal and vertical straps create a cage that secures the tire when ratcheted. Used on Holmes Wheel Lifts. 2" wide. Ratchet sold separately.
Part # Working Load Limit Weight
WLS650 1,665 lbs. 4.00 lbs.
Holmes Type w/ Chain Strap
The cage type construction of this strap is similar to our WLS600. 1/4" chain is attached to each end. Used on Holmes wheel lifts.
Part # Working Load Limit Weight
WLS700 5,000 lbs. 3.00 lbs.
Quick Pik Type Strap
This tiedown has a flat hook which hooks into the rear fixture. The strap is then passed over the top of the tire and placed into the winch. Used by Challenger Quick-Pik. 4" x 83". Winch not included.
Part # Working Load Limit Weight
WLS800 835 lbs. 1.00 lbs.
Collins Type Strap
The loose end of this tiedown passes through the fixed end. Ratcheting then chokes the tire. Used on Collins. 1" wide x 8' long. Supplied with ratchet.
Part # Working Load Limit Weight
WLS900 1,665 lbs. 1.60 lbs.
Formula II Type Strap
This strap is the replacement for the Formula II snap hook with ring. Hook snaps into ring which then chokes the tire. Ratchet sold separately.
Part # Working Load Limit Weight
WLS900EX 1,665 lbs. 2.00 lbs.
Formula II Type Extention
This strap is 2" x 20" overall length with D ring and snap hook. This enables our WLS900 to be used on larger tires. Formula II extension strap. Ratchet not included.
Part # Working Load Limit Weight
WLS1000 1,665 lbs. 1.90 lbs.
Reilly Type Strap
This type of cage strap is used on Reilly equipment. Loose end fits into ratchet. Ratchet sold separately.
Part # Working Load Limit Weight
WLS1100 1,665 lbs. 1.90 lbs.
Car Dolly Strap
A cage strap used on a number of aftermarket lifts and dollies. Flat Hook fits notch in front and loose end goes to the ratchet. Ratchet sold separately.
Part # Working Load Limit Weight
WLS1200 1,665 lbs. 1.00 lbs.
Atlas Type Strap
This strap is primarily used on Atlas or Aatac units. The end hardware is a flat hook. It is 2" wide x 100" long. Ratchet not included.
Part # Working Load Limit Weight
WLS1300 1,665 lbs. 1.20 lbs.
Finger Strap
This commonly used strap is sometimes referred to as a finger strap. It is found on Merlin Hijacker, Avenger and the Peterson Scoop. 2" wide x 100" long. Ratchet sold separately.
Part # Working Load Limit Weight
WLS1400 1,665 lbs. 4.00 lbs.
Chevron Type Basket
This is the replacement for the new Chevron basket strap. Also known as a cage strap, it is adjustable using the chain extension, as well as two special T hooks.
Part # Working Load Limit Weight
WLS1400L 1,665 lbs. 4.50 lbs.
Chevron Wheel Lift Strap Large
This strap is extra large for use on SUVs and vehicles with larger tires. It is used on Chevron equipment and has the two adjustable T hooks and chain. The WLS1400 should be used on vehicles with smaller tires.
Part # Working Load Limit Weight
WLS1500 1,665 lbs. 1.80 lbs.
Dynamic Type Strap
This is the Dynamic Type strap. The strap crosses the tire. Snap hook with latch is supplied as well as a protective sleeve. 2" x 100". Ratchet sold separately.
Part # Working Load Limit Weight
WLS1600 1,665 lbs. 4.00 lbs.
Challenger Quick Pic Lite Type
This 2" strap has the same dimensions and structure as our WLS1610 used on Miller equipment. Some prefer its wider webbing. It has the two T hooks and 36" of 1/4" chain.
Part # Working Load Limit Weight
WLS1610 835 lbs. 3.40 lbs.
1" Plastic Coated Basket
This is the strap for the Challenger brand wheel lift as well as other Miller brands. It is 1" wide urethane (plastic) coated webbing and has the T hooks and 36" of 1/4" chain.
Part # Working Load Limit Weight
WLS1610RS 835 lbs. 0.58 lbs.
Replacement Strap for WLS1610
Sometimes careless operators allow the WLS1610 to drag behind the wheel lift, damaging the strap. This replacement strap replaces the damaged part. Simply cut off the damaged strap at the upper ring and attach this new strap with the locking flat hook to the same ring. Now your old strap can still be used.
Part # Working Load Limit Weight
WLS1700 1,665 lbs. 1.20 lbs.
Danco Type
This strap is replacement for the Danco strap. It is used as a lasso strap and has a twisted eye.. 2" x 84". Ratchet sold separately.
Part # Working Load Limit Weight
WLS1800 1,665 lbs. 0.70 lbs.
Jerr-Dan Type Lasso Strap
This type of lasso strap has a sewn flat eye. 2" x 100". Used on Jerr-Dan and others. Ratchet sold separately.
Part # Working Load Limit Weight
WLS1810 1,665 lbs. 2.00 lbs.
Jerr-Dan Type Basket
This is the Jerr-Dan tie strap assembly. Ratchet sold separately.
Part # Working Load Limit Weight
WLS1900 3,335 lbs. 2.90 lbs.
Century Class C Type Strap
This is the heavy duty wheelift strap for the Century Class C.
Part # Working Load Limit Weight
WLS2000 1,665 lbs. 1.50 lbs.
Jerr-Dan Quick Pick 40 Type
This strap fits the Jerr-Dan Quick Pick40 wheel lift. It is 2" webbing and is used as a basket type strap. Ratchet sold separately.
Part # Working Load Limit Weight
WLS2100 1,665 lbs. 1.00 lbs.
Club Car Type Tiedown Strap
This strap is made for securing electric carts including Club Car. It is 2" wide web with a special hook on one end. 2" x 80" long. Ratchet sold separately.
Part # Working Load Limit Weight
WLS2200 1,665 lbs. 2.10 lbs.
Combo Strap
This strap is known as a Combo strap. It encompasses the wheel as well as the support arms or forks that the wheel is resting on. 2" x 86" long. Ratchet sold separately.
Part # Working Load Limit Weight
WLS2300 1,665 lbs. 2.10 lbs.
Jerr-Dan 2 PC Basket Strap
For Jerr-Dan MPL Series


Toll Free - 800-748-2651           Western Sling and Supply - PO Box 208 - Sedalia, Colorado 80135           Fax - 303-688-5905